| Main Raw Material: | Resin, Glass Beads, Titanium Dioxide, CaCO3, Wax |
|---|---|
| Appearance: | Powder |
| Color: | White |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
2. Specifications:
We produce different standards of thermoplastic road marking paint, such as Chinese standard, BS standard, AASHTO standard and so on. The contents and raw materials are different with different standards.
| Gravity, g/m3 | 2.1 g/m3 |
| Color | Yellow, Orange, Red and etc |
| Heating Temperature | 150ºC-220ºC |
| Softening Point, ºC | 110 ºC |
| Coating Appearance | No wrinkles, dots, blisters, cracks, fall-out & stick tyres |
| Drying Time, min | Within 3 minutes |
| Chroma Performance | Reverse material (white) |
| Compressive Strength, MPa | 26 |
| Abrasive Resistance, mg | 42 |
| Water Resistance | Great(in water for 24 hours) |
| Alkali Resistance | Great(in saturated solution of calcium hydroxide for 24 hours) |
| Glass Beads, % | 19% |
| Fluidity, s | 40s |
| Coating Resisitance | Resist -10ºC for 4 hours |
| Heat Resistance | Under 200ºC-220ºC for 4 hours |
| Material | C5 Petroleum Resin, CaCO3, Wax, Glass Beads, EVA, PE and so on. |
| Package | 25kg/bag, by plastic woven bag. One 20' container can load Max. 25 tons. |
| Application: | Rroad marking, straight line, dotted line, curve, oriented arrow, letter and etc. |
3.Features:
1) Higher adhesive strength: Special elastomer is added in our recipe of thermoplastic road marking paint in order to improve the adhesive strength
2) Stronger crack resistance: Our recipe compounded a special additive which is seasoned with the temperature. Thus it avoids possible deformation of the melted film caused by nature temperature variation.
3) Bright color: Our recipe introduced high quality color filler with reasonable mixture proportion. And it helps thermoplastic paint lasts for years without color change.
4) Enhanced wet night visibility
5) Immediate retroreflectivity
4.Production Process:
Put all of raw material into the bucket then heating and stirring
6. Related Products:
6.1 Glass Beads:
Glass Beads are used to strengthen the reflection of thermoplastic lines. All standards, such as: BS6088A, BS6088B, AASHTOM247,EN1423, EN1424, Australia AS2009 B3.2, KOREA KS standard and CS can be produced as requested.
){kind=link}